By Jackson 
New parts are nice, but a repair is often faster and cheaper. A worn shaft can be rebuilt. A stripped thread can be restored. Even a snapped bolt can be removed without ruining the part around it. The trick is finding a shop with the skill, the machines, and the patience to fix what others replace.
This guide looks at four Houston repair shops and what each one fixes best. Lowrance Machine leads the list because it combines repair work with machining, molds, and special fasteners. If you need a machine shop Houston TX customers trust for repair jobs, start with the table below.
Match Your Problem to the Right Shop
| Your problem | Good fit |
|---|---|
| Worn shaft, stripped threads, or a broken bolt | Lowrance Machine |
| A damaged rubber or urethane mold | Lowrance Machine |
| A pump, turbine, or compressor that needs an overhaul | Houston Dynamic Service |
| A pump or mechanical system that needs a repair center | Motion Repair & Services |
| Worn equipment that needs grinding and metal spray | Hanson Gear Works |
1. Lowrance Machine: Best for Machined Repairs and Rebuilds
| Fast fact | Details |
|---|---|
| Address | 13510 East Hardy Road, Houston, TX 77039 |
| Phone | (281) 449-6524 |
| Website | https://www.lowrancemachine.com |
| Started | 1964, family-owned |
| Quality system | ISO 9001:2015 certified |
Four repairs it handles
Lowrance Machine lists industrial repair as a core service. In practice, that covers four common problems:
- Shaft repair: A worn or damaged shaft can often be brought back to size instead of replaced.
- Thread restoration: Damaged threads are cleaned up or rebuilt so a bolt or fitting can hold again.
- Broken bolt removal: A bolt that snapped inside a part can be taken out without wrecking the part.
- Component rebuilding: Worn pieces are rebuilt so equipment can go back to work.
It also repairs rubber and urethane molds, which are the shaped tools used to form parts.
Why a machine shop is a smart place for repairs
Repairs often require more than welding or grinding. The finished piece must fit, turn, and seal as it did when it was new. That takes accurate machining. Lowrance Machine uses horizontal and vertical lathes, machining centers, and manual machines. If you need a CNC machine shop in Houston TX that can fix a part and then machine the new piece beside it, you can get both in one place.
When the repair is not enough
Sometimes a part is too far gone. In that case, the shop can make a replacement. It produces engineered components such as piston rods, bearing housings, seal rings, and custom flanges. It also makes non-standard bolts, studs, and nuts to your specifications, so a one-of-a-kind fastener is not a problem.
Speed and quality
Downtime costs money, so the shop offers expedited service on request. Its ISO 9001:2015 certified quality system supports consistent manufacturing and inspection, and projects are managed from initial planning through final inspection.
Customers it serves
Oil and gas, aerospace, medical, packaging, and chemical companies use Lowrance Machine for repairs and new parts alike.
How to prepare your repair
- Keep every piece of the broken part, including small chips.
- Take photos and note the machine it came from.
- Share the material if you know it.
- Tell the shop your deadline right away.
Ready to start? Contact Lowrance Machine for a quote.
2. Houston Dynamic Service, Inc.
Houston Dynamic Service, at 8150 Lawndale, Houston, TX 77012, is an independent shop that repairs rotating equipment such as pumps, turbines, compressors, blowers, centrifuges, fans, couplings, and high-speed gear units. It says it is ISO 9001 compliant and can turn parts up to 100 inches in diameter and 30 feet long. It also advertises 24-hour, 7-day service and dynamic rotor balancing.
Best for: Large rotating equipment that needs a full overhaul.
3. Motion Repair & Services
Motion opened a repair shop at 10710 Sharmon Road, Houston, TX 77038, in 2024. The 75,000 square foot space has CNC and manual machine tools, lifting capacity up to 30 tons, and diagnostic and testing equipment. Its technicians focus on mechanical systems, fluid power, process pumps, and field services.
Best for: Pumps and mechanical systems when you want parts and repairs from one provider.
4. Hanson Gear Works
Hanson Gear Works at 1125 Cypress Station Drive in Houston describes itself as a machine grinding and rebuilding company. Its services include machining, spray metalizing, and machinery repair, along with grinding, welding in many alloys, and plating.
Best for: Worn parts that need grinding, metal spray, or plating.
Repair or Replace? A Simple Guide
| Situation | Better choice |
|---|---|
| The part is worn but whole | Repair |
| Only the threads are damaged | Repair |
| A bolt is stuck or snapped inside a good part | Repair |
| The part is cracked through or too thin to restore | Replace with a new machined part |
| The part is no longer made | Have a new one machined to match |
Whichever path you choose, ask any CNC machine shop in Houston how it checks finished work and how fast it can turn the job.
Frequently Asked Questions
What repairs does Lowrance Machine offer?
It offers shaft repair, thread restoration, broken bolt removal, and component rebuilding. It also repairs rubber and urethane molds.
Can Lowrance Machine make a replacement if a repair will not work?
Yes. It makes engineered components, custom flanges, and non-standard fasteners to your requirements.
Does Lowrance Machine offer rush service?
Yes. Expedited service is available on request.
Final Thoughts
Houston Dynamic Service, Motion Repair & Services, and Hanson Gear Works each have a clear specialty. Yet when the job calls for machining, mold repair, special bolts, and repair work all in one stop, Lowrance Machine is the machine shop Houston customers should call first.
Ready to begin? Visit Lowrance Machine or call (281) 449-6524 to start your repair.